Lots of RVers like to head south for the winter, but that isn’t an option for some of us. While there are still a few good weekends left for camping this year, if you are one of those late season campers. However most of our customers probably already have winterized their campers by now. If you are able to store your RV in a covered garage or storage center, then there is not a lot that you have to do to protect your RV from the elements. Those of us who use an RV cover to keep our RV safe while not in use know there is more that goes into getting your cover on properly than simply throwing it over your rig.
The first thing that you should do before putting your cover on is wash your RV. Dirt, grease, and any bugs left on your RV’s exterior can set in and ruin your rig’s paint and body. Give it a good wash and dry it completely before you put your cover on. If you have anything with sharp corners on your roof, such as antennas or solar panels, remove them. If not, cover them with towels or blankets so the sharp edges won’t rip your cover.
The biggest challenge of getting your RV covered is getting over the top. Instead of using a ladder and your hands, tie a rope to one side of your cover and pull it over on the other side. If you do choose to use a ladder, be very careful. Falls and accidents are quite common. And if you get onto the roof to center everything, watch your step. You may not be able to see air vents or other oft spots on the roof.
Letting your RV hibernate for the winter may be a necessity, but be sure to use a quality cover to make sure that it is safe when not in use. If you are looking for a good quality cover, just ask us for help in finding the right one. If you are looking for a new RV in Pennsylvania, then just stop by Lerch RV!